Embedded Linux Essentials

From boot ROM to root filesystem: building, bringing up and maintaining a Linux-based product

A practical guide to embedded Linux for firmware and hardware engineers. Learn when Linux is the right choice, what the hardware needs, how the boot chain works, how Yocto and Buildroot build a system, how the kernel and device tree describe a board, and how to make the product real-time, reliable and debuggable.

Intermediate · 5 modules · 17 lessons · free certificate

About this course

Embedded Linux sits between the microcontroller world and the desktop. It gives a product a full network stack, file systems, rich user interfaces and a huge library of open-source software, but it brings external memory, a multi-stage boot, a kernel that must be configured for your board and a root filesystem that you have to build, update and keep secure for years. Engineers who arrive from microcontrollers often find the individual pieces familiar and the way they fit together confusing. This course explains that structure in the order a system actually starts and is built.

We use Arm Cortex-A application processors and the U-Boot bootloader as the concrete reference because they are widely used and well documented, and we note where x86 and RISC-V systems differ. The Yocto Project and Buildroot are compared neutrally, as are the common update frameworks. Each module ends with a short quiz that checks understanding rather than memory.

The course does not teach Linux command-line basics, kernel driver programming in depth, DDR routing or the internals of secure boot and signed updates. Secure boot chains, image signing and update protocols are covered in Secure Boot and Firmware Updates, scheduling theory in RTOS Fundamentals, and memory interface layout in High-Speed Interface Design: DDR, USB, PCIe and Ethernet.

Before you start: Comfortable at a Linux command line and with C programming. Familiarity with microcontroller peripherals such as GPIO, I2C, SPI and UART, as covered in Embedded Firmware Fundamentals, is assumed. No previous embedded Linux experience is needed.

What you will learn

  • Decide when embedded Linux is justified and what hardware it needs, including the SoM versus chip-down trade-off
  • Explain each stage of the boot chain, from boot ROM and bootloader to kernel, device tree, initramfs and init
  • Compare the Yocto Project and Buildroot and plan for reproducible builds and licence compliance
  • Configure a kernel, describe hardware in device tree and access GPIO, I2C and SPI devices from user space
  • Choose real-time, storage, watchdog and update strategies that survive power loss and field use
  • Debug a target using the serial console, logs, gdbserver, strace and perf

Who it is for

  • Firmware engineers moving from microcontrollers and RTOSes to Linux-based products
  • Hardware engineers designing boards around an application processor or system-on-module
  • Linux application developers who need to understand the platform underneath their software
  • Technical leads deciding between an MCU, an RTOS and embedded Linux for a new product

Syllabus

Module 1: Choosing Embedded Linux and Its Hardware

When Linux beats an MCU and RTOS, what an application processor needs around it, and how to judge software support before you commit.

  1. When to Choose Embedded Linux
  2. Hardware for Linux: Processors, Memory and Power
  3. Judging Software Support Before You Commit
  4. Module quiz (5 questions)

Module 2: The Boot Chain

Every stage from power-on to a login prompt: boot ROM, SPL and U-Boot, the kernel and device tree, initramfs, the root filesystem and init.

  1. Boot ROM, SPL and the Bootloader
  2. Kernel, Device Tree and Initramfs
  3. Init Systems and Boot Time
  4. Module quiz (5 questions)

Module 3: Building the System

Cross toolchains, the Yocto Project and Buildroot compared, and how to make builds reproducible and licence-compliant.

  1. Cross Toolchains and Sysroots
  2. The Yocto Project and Buildroot Compared
  3. Reproducible Builds and Licence Compliance
  4. Module quiz (5 questions)

Module 4: The Kernel, Device Tree and Hardware Access

Configuring the kernel, describing a board in device tree, the main driver frameworks and how applications reach GPIO, I2C and SPI devices.

  1. Configuring the Kernel and Using Modules
  2. Device Tree Source and Overlays
  3. Driver Frameworks: GPIO, I2C, SPI, IIO, Input and Net
  4. Accessing Hardware from User Space
  5. Module quiz (5 questions)

Module 5: Real-Time, Reliability, Updates and Debugging

Meeting timing needs, surviving power loss on flash, updating safely, basic hardening and the tools for finding faults on a target.

  1. Real-Time Options: PREEMPT_RT, Isolation and Coprocessors
  2. Flash Storage, Power Loss and Watchdogs
  3. Updates and Security Basics
  4. Debugging on the Target
  5. Module quiz (5 questions)

Free downloads for this course

Enrol for free

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.