Flex and Rigid-Flex PCB Design

Design flexible and rigid-flex circuits that bend where they should, survive assembly and keep working for the life of the product.

Learn when flex or rigid-flex beats a cable and connector, and how to design one that lasts. This course covers polyimide materials, rolled and electrodeposited copper, coverlay and stiffeners, flex constructions, IPC-2223 and IPC-6013, bend design, rigid-to-flex transitions, fabrication and assembly concerns, documentation and flex testing.

Intermediate · 5 modules · 17 lessons · free certificate

About this course

A flexible circuit can fold a product into a space no rigid board could fill, remove connectors and cables, and carry signals across a hinge for years. It can also crack at the first bend, lift its pads in reflow or cost several times what the team expected. The difference is mostly mechanical design: which materials are chosen, where the copper sits relative to the bend, how traces cross the flex zone and how the transitions, stiffeners and drawings are handled. This course works through those decisions in the order a flex or rigid-flex design meets them.

Each module explains the physics or process behind a rule so you can judge when it applies. Bend radius guidance is given as typical ratios to thickness, standards are described at a concept level, and every dimension is labelled as a starting point to confirm with your fabricator, because flex capability varies more between suppliers than rigid board capability does.

The course assumes you can already lay out a rigid multilayer board. It does not cover printed or stretchable electronics, detailed impedance calculation on flex (see Controlled Impedance and Transmission Lines), or fabrication chemistry in depth (see PCB Fabrication Processes in Depth). Completing it records that you finished the course; it is not a certification to any IPC standard.

Before you start: You should have laid out at least one rigid multilayer board and understand stackups, vias, pads and fabrication data. PCB Design for Manufacturing and PCB Stackup Design in the AAVICO Academy cover the background assumed here.

What you will learn

  • Decide when flex, rigid-flex or a cable and connector is the better interconnect for a product
  • Choose base films, adhesive systems, copper foil, coverlay and stiffeners for static or dynamic use
  • Select a flex construction and relate it to IPC-2223 design guidance and IPC-6013 performance types
  • Design bend areas using bend radius ratios, the neutral axis and sound routing practice
  • Design rigid-to-flex transitions, anchored pads and stiffened connector and component areas
  • Prepare bend diagrams, zone and stack drawings, and plan fabrication, assembly and flex testing

Who it is for

  • PCB designers about to lay out their first flex or rigid-flex circuit
  • Hardware and mechanical engineers deciding between flex, rigid-flex and cable assemblies
  • Layout specialists who want the mechanical reasoning behind flex design rules
  • Engineering leads and buyers who review flex fabrication drawings and quotes

Syllabus

Module 1: Choosing Flex and Its Materials

When flex, rigid-flex or a cable is the right answer, and the films, adhesives, copper, covers and stiffeners a flex circuit is made from.

  1. Flex, Rigid-Flex or Cable and Connector?
  2. Base Films, Adhesives and Copper Foil
  3. Coverlay, Flexible Mask, Stiffeners and Adhesives
  4. Module quiz (5 questions)

Module 2: Flex Constructions and Standards

Single, double and multilayer flex, rigid-flex with air-gap and bookbinder options, and how IPC-2223 and IPC-6013 frame the design and its acceptance.

  1. Single, Double and Multilayer Flex
  2. Rigid-Flex, Air-Gap and Bookbinder Constructions
  3. IPC-2223, IPC-6013 and the Material Specifications
  4. Module quiz (5 questions)

Module 3: Designing the Bend

Static and dynamic flexing, bend radius ratios, the neutral axis and copper strain, routing through bends, and flex outlines that resist tearing.

  1. Static and Dynamic Flexing and Bend Radius
  2. The Neutral Axis and Copper Strain
  3. Routing Copper Through a Bend
  4. Flex Outlines, Slits and Tear Stops
  5. Module quiz (5 questions)

Module 4: Transitions, Pads and Stiffeners

Design the rigid-to-flex transition, anchor pads so they stay on the film, place components on flex and use stiffeners for connectors and parts.

  1. Designing the Rigid-to-Flex Transition
  2. Anchoring Pads and Placing Components on Flex
  3. Stiffeners for Connectors and Components
  4. Module quiz (5 questions)

Module 5: Fabrication, Assembly, Documentation and Test

Panel utilisation and cost, moisture and handling in assembly, the drawings and models a flex needs, and how flex circuits are tested and cycled.

  1. Panel Utilisation and Flex Cost
  2. Moisture, Baking, Handling and Fixtures
  3. Bend Diagrams, Mechanical Models and Zone Drawings
  4. Testing Flex: Electrical Test and Flex Cycling
  5. Module quiz (5 questions)

Enrol for free

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.