Wireless Connectivity for IoT
Choose the right radio, close the link budget and integrate it into a product that works in the field and passes certification.
Learn how to choose and integrate a wireless technology for a connected product. The course covers requirements, link budgets and ISM bands, Bluetooth Low Energy, Wi-Fi, Thread, Zigbee and Matter, LoRaWAN, LTE-M and NB-IoT, modules versus chip-down design, antennas and RF layout, provisioning, security, over-the-air updates and radio testing.
Intermediate · 5 modules · 19 lessons · free certificate
About this course
Most connected products that disappoint in the field were let down by decisions made early: a radio chosen because the team had used it before, a link budget that assumed free space, an antenna squeezed into the last corner of the board next to a battery, or a provisioning flow that nobody tested with a real customer's router. This course teaches the reasoning that avoids those mistakes, from the first requirements conversation to the hand-off to a certification lab.
The course starts with requirements and the constraints that rule technologies in or out: range, data rate, energy, cost, infrastructure and regulation. It then builds the radio fundamentals every IoT engineer needs: decibels, link budgets with the free-space path loss formula, receiver sensitivity, fade margin, antennas and ISM bands by region. Honest overviews of Bluetooth Low Energy, Wi-Fi, IEEE 802.15.4 with Thread and Zigbee, Matter, LoRa and LoRaWAN, LTE-M, NB-IoT and other options follow. The final module covers pre-certified modules versus chip-down design, RF layout and antenna tuning, provisioning, security, over-the-air updates and how to test a radio before it goes to a lab.
The course does not teach RF circuit design from first principles, protocol stack programming or the certification process itself. Formal radio, EMC and safety approvals are covered in Regulatory Compliance for Electronic Products, and battery-life budgeting in Low-Power Design for Battery Devices. Numbers that vary by standard version or region are labelled typical or deferred to the specification.
Before you start: You should be comfortable reading schematics and understand basic electronics such as voltage, current, power and impedance. Logarithms help but are explained where used. Embedded Firmware Fundamentals and PCB Layout Fundamentals: Placement and Routing in the AAVICO Academy cover useful background.
What you will learn
- Turn product requirements into a short list of wireless technologies with justified trade-offs
- Calculate a link budget using dBm, antenna gain, free-space path loss, receiver sensitivity and fade margin
- Explain how BLE, Wi-Fi, Thread, Zigbee, Matter, LoRaWAN, LTE-M and NB-IoT differ in range, power and infrastructure
- Decide between a pre-certified module and a chip-down design and state what a modular grant does and does not cover
- Place, lay out and tune an antenna, and plan coexistence between radios in one product
- Plan provisioning, security, over-the-air updates and pre-certification radio testing
Who it is for
- Hardware and embedded engineers adding a radio to a product for the first time
- Product engineers and technical leads who must choose between BLE, Wi-Fi, Thread, LoRaWAN and cellular
- Layout designers who need to place and tune antennas and keep RF performance intact
- Firmware engineers who want to understand the radio, power and provisioning trade-offs behind their stack
Syllabus
Module 1: Choosing a Wireless Technology
Turn requirements into a technology choice: range, data rate, energy, cost, infrastructure, lifetime and the regulatory constraints of each market.
- Start from Requirements, Not Radios
- The Landscape: Range, Rate and Power Trade-offs
- Infrastructure, Cost and Product Lifetime
- Spectrum, ISM Bands and Regional Rules
- Module quiz (5 questions)
Module 2: Radio Fundamentals and Link Budgets
Decibels, EIRP, free-space path loss, receiver sensitivity, fade margin, real-world propagation and the antennas that make or break a link.
- Decibels, dBm, Antenna Gain and EIRP
- The Link Budget: Path Loss and Receiver Sensitivity
- Real-World Propagation and Fade Margin
- Antenna Types, Ground Planes and Placement
- Module quiz (5 questions)
Module 3: Short-Range Technologies: BLE, Wi-Fi, Thread, Zigbee and Matter
How Bluetooth Low Energy, Wi-Fi and IEEE 802.15.4 meshes work, what they cost in energy and infrastructure, and where Matter fits.
- Bluetooth Low Energy: Advertising, Connections and GATT
- Wi-Fi for IoT: Throughput, Power and Practicalities
- IEEE 802.15.4 Meshes: Thread and Zigbee
- Matter: An Application Layer over IP
- Module quiz (5 questions)
Module 4: Wide-Area Technologies: LoRaWAN, Cellular IoT and Beyond
LoRa modulation and the LoRaWAN network, LTE-M and NB-IoT with their power-saving modes, and the other options: sub-GHz proprietary, satellite and specialist radios.
- LoRa and LoRaWAN
- Cellular IoT: LTE-M and NB-IoT
- Other Options: Sub-GHz Proprietary, Satellite and Specialist Radios
- Module quiz (5 questions)
Module 5: Integration, Security and Radio Testing
Modules versus chip-down design, RF layout, antenna tuning and coexistence, provisioning, security and over-the-air updates, and testing a radio before it goes to a lab.
- Pre-Certified Modules versus Chip-Down Design
- RF Layout, Antenna Tuning and Coexistence
- Provisioning, Security and Over-the-Air Updates
- Testing the Radio: Range, Conducted, Radiated and Pre-Scan
- Module quiz (5 questions)
Free downloads for this course
- Product Certification Planning Worksheet (Template)
Discuss your project
Email support@aavico.com or use Get in Touch when the website finishes loading.