{"docs":[{"id":138,"title":"ESD Protection: Designing to Pass IEC 61000-4-2","heading":"ESD Protection: Designing to Pass IEC 61000-4-2","subheading":null,"category":"Compliance","body":{"root":{"type":"root","children":[{"type":"heading","tag":"h3","version":1,"children":[{"type":"text","text":"Designing the current path","version":1}]},{"type":"paragraph","version":1,"children":[{"type":"text","text":"Place a TVS diode or ESD protection array at the connector, before the signal reaches anything else, with the shortest possible connection to ground or chassis. At these edge rates the connection develops tens of volts per nanohenry, so the protector must sit right at the entry point with a via straight to the plane.","version":1}]},{"type":"paragraph","version":1,"children":[{"type":"text","text":"Keep protected and unprotected traces apart, add series resistance or filtering on sensitive inputs where the signal allows, and bond metal enclosures and connector shells with low impedance. In plastic enclosures, gaps around seams and buttons decide where discharges can enter.","version":1}]}],"direction":"ltr","format":"","indent":0,"version":1}},"tags":"Compliance, ESD, EMC, Immunity","cardCta":{"label":null,"link":null},"pageCta":{"label":"Talk to AAVICO engineering","link":"/contact"},"excerpt":"Every product a person touches must survive electrostatic discharge. Passing IEC 61000-4-2 depends on where the energy goes, which is decided at the connector.","featuredImage":null,"type":"Blog","readTime":"3 min read","publishedAt":"2026-11-15T21:01:00.000Z","heroImage":null,"introText":"A person walking across a carpet can carry several kilovolts, and touching a product releases that charge in a pulse with a rise time under a nanosecond. IEC 61000-4-2 defines how products are tested for immunity to these discharges, and most EMC product standards call it up. Failures range from a momentary reset to permanent damage. This article explains the test, its levels, and the design choices that let a product pass.","metrics":[{"id":"esd-protection-designing-to-pass-iec-61000-4-2-metric-1","value":"8 kV","label":"The highest standard contact discharge level, level 4 in IEC 61000-4-2.","icon":null},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-metric-2","value":"15 kV","label":"The highest standard air discharge level, also level 4.","icon":null},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-metric-3","value":"0.8 ns","label":"The nominal rise time of the discharge current, which makes ESD a high-frequency event.","icon":null},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-metric-4","value":"150 pF","label":"With 330 Ω, the discharge network that models a person holding a metal object.","icon":null}],"gallery":[],"challenge":{"root":{"type":"root","children":[{"type":"paragraph","version":1,"children":[{"type":"text","text":"The discharge current peaks at several amps to tens of amps within a nanosecond. Its fast edge makes every trace and cable a potential antenna, so an ESD event can upset circuits far from the point of contact as well as damaging the input it hits.","version":1}]},{"type":"paragraph","version":1,"children":[{"type":"text","text":"IC datasheets often quote an ESD rating, but this is usually a component-level human body model figure intended for safe handling in a factory. It does not mean the pin will survive a system-level IEC 61000-4-2 discharge, which delivers far more current.","version":1}]}],"direction":"ltr","format":"","indent":0,"version":1}},"blockquote":{"quote":"Decide where the ESD current will go before it arrives, and make that path shorter than any path through your circuit.","author":"","role":"AAVICO Engineering"},"supportImage1":null,"deliverables":{"root":{"type":"root","children":[{"type":"paragraph","version":1,"children":[{"type":"text","text":"Find the required levels and performance criterion in your product standard; CISPR 35 for multimedia equipment, for example, specifies 4 kV contact and 8 kV air.","version":1}]},{"type":"paragraph","version":1,"children":[{"type":"text","text":"Protect each exposed interface at the connector with a device rated for the level and suited to the signal, and plan its ground path.","version":1}]},{"type":"paragraph","version":1,"children":[{"type":"text","text":"Test prototypes with an ESD generator at every touch point in both polarities, and fix weaknesses before formal testing.","version":1}]}],"direction":"ltr","format":"","indent":0,"version":1}},"results":[{"id":"esd-protection-designing-to-pass-iec-61000-4-2-result-1","title":"Compliance","description":"The product passes the immunity tests its standard requires."},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-result-2","title":"Field Robustness","description":"Fewer resets and failures from everyday static."},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-result-3","title":"Lower Returns","description":"Damaged interfaces stop being a source of failed units."},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-result-4","title":"Faster Approval","description":"Problems found on prototypes are fixed before the lab."}],"lookingAhead":{"root":{"type":"root","children":[{"type":"paragraph","version":1,"children":[{"type":"text","text":"Firmware matters too. A watchdog and robust recovery can turn a lock-up into a brief, self-clearing glitch, which may meet a less strict performance criterion.","version":1}]},{"type":"paragraph","version":1,"children":[{"type":"text","text":"Choose low-capacitance protection devices for high-speed interfaces such as USB and HDMI, so the protection does not degrade the signal.","version":1}]}],"direction":"ltr","format":"","indent":0,"version":1}},"supportImage2":null,"testimonial":{"quote":null,"author":null,"role":null,"photo":null},"challengesSolved":[{"id":"esd-protection-designing-to-pass-iec-61000-4-2-challenge-1","title":"Connectors with no protection at the entry point","description":null,"icon":null},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-challenge-2","title":"Long ground paths from the protection device","description":null,"icon":null},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-challenge-3","title":"Relying on IC datasheet ESD ratings","description":null,"icon":null},{"id":"esd-protection-designing-to-pass-iec-61000-4-2-challenge-4","title":"Lock-ups that need a power cycle to clear","description":null,"icon":null}],"relatedPosts":[],"contactUs":{"show":true},"updatedAt":"2026-11-15T17:32:32.682Z","createdAt":"2026-11-15T17:32:32.682Z"}],"hasNextPage":false,"hasPrevPage":false,"limit":10,"nextPage":null,"page":1,"pagingCounter":1,"prevPage":null,"totalDocs":1,"totalPages":1}