HDI and Microvia Design
Design high density interconnect boards with microvias that fan out fine-pitch BGAs, build reliably and cost no more than they must.
Learn when a board needs HDI and how to design one well. This course covers via types and the IPC microvia definition, laser drilling and copper filling, stacked and staggered microvia reliability, via-in-pad, sequential lamination and build-up notation, IPC-2226 design types, fine-pitch BGA fan-out, cost drivers and how to specify HDI to a fabricator.
Advanced · 5 modules · 16 lessons · free certificate
About this course
Fine-pitch BGAs, small enclosures and dense mixed-technology boards eventually run out of room for conventional through-hole vias. High density interconnect (HDI) solves that with laser-drilled microvias, thin build-up dielectrics and sequential lamination, but every extra build-up level adds process steps, cost, lead time and reliability questions. The difference between a good HDI design and an expensive, fragile one is usually decided in the first week of layout, when the via structure and build-up are chosen.
This course explains how microvias are made and why they fail, so you can choose between stacked and staggered structures with your eyes open. It covers via-in-pad, build-up notation such as 1+N+1 and 2+N+2, the IPC-2226 design types, practical fan-out strategies for 0.8, 0.65, 0.5 and 0.4 mm pitch BGAs, and how to write a specification that a fabricator can quote and build. Dimensions are labelled as typical because HDI capability varies widely between fabricators: always confirm them with yours.
The course assumes you can already design a conventional multilayer board. Stackup planning, laminate selection, impedance control and high-speed routing are treated only where HDI changes them; they are covered in depth in PCB Stackup Design, PCB Laminates and Materials Selection, Controlled Impedance and Transmission Lines and High-Speed Interface Design: DDR, USB, PCIe and Ethernet.
Before you start: You should have laid out at least one multilayer board and understand stackups, vias, annular rings and fabrication data. PCB Design for Manufacturing and PCB Stackup Design in the AAVICO Academy cover the background assumed here.
What you will learn
- Decide whether a design needs HDI and identify the lowest-complexity build-up that will route it
- Explain the IPC microvia definition and choose between through, blind, buried, stacked and staggered vias
- Describe how microvias are laser drilled, plated and filled, and the weak-interface failure mode they can suffer
- Plan BGA fan-out at 0.8, 0.65, 0.5 and 0.4 mm pitch using escape-row reasoning
- Read and use build-up notation and IPC-2226 design types, and count lamination cycles
- Write an HDI fabrication specification and ask a fabricator the right capability questions
Who it is for
- PCB designers moving from through-hole-via boards to their first HDI layout
- Hardware engineers selecting fine-pitch BGA processors, FPGAs or memory and planning the board around them
- Layout specialists who want the process and reliability reasoning behind HDI design rules
- Engineering leads and buyers who review HDI stackups and fabrication specifications
Syllabus
Module 1: HDI Fundamentals and Via Structures
What makes a board HDI, when you need it, the via types available and the exact meaning of a microvia.
- What Makes a Board HDI and When You Need It
- Through, Blind, Buried and Microvias
- How IPC Defines a Microvia
- Module quiz (5 questions)
Module 2: Making Microvias and Keeping Them Reliable
Laser drilling, plating and copper filling, stacked versus staggered structures and the reliability concerns every HDI designer must understand.
- Laser Drilling and Build-Up Dielectrics
- Plating and Copper Filling Microvias
- Stacked Versus Staggered Microvias
- Microvia Reliability and the Weak Interface
- Module quiz (5 questions)
Module 3: Build-Ups, Sequential Lamination and Via-in-Pad
How HDI boards are built layer by layer, how build-ups are described, the IPC-2226 design types and how to put vias in component pads safely.
- Sequential Lamination and Build-Up Notation
- IPC-2226 and the HDI Design Types
- Via-in-Pad: Filled and Plated Over
- Module quiz (5 questions)
Module 4: Fine-Pitch BGA Fan-Out
Escape-row reasoning and practical fan-out strategies for 0.8, 0.65, 0.5 and 0.4 mm pitch BGAs.
- Escape Routing Principles
- Fan-Out at 0.8 mm and 0.65 mm Pitch
- Fan-Out at 0.5 mm and 0.4 mm Pitch
- Module quiz (5 questions)
Module 5: Cost, Specification and Working with the Fabricator
What makes HDI expensive, how to keep lamination cycles to a minimum and how to specify an HDI board so it can be quoted and built.
- What Drives HDI Cost
- Minimising Lamination Cycles
- Specifying HDI and Working with the Fabricator
- Module quiz (5 questions)
Free downloads for this course
- Via and Drill Reference (Reference)
Discuss your project
Email support@aavico.com or use Get in Touch when the website finishes loading.