PCB Assembly and Soldering

How solder joints are really made, from alloy and paste to reflow, wave and the iron.

Understand what happens on an assembly line and why. This course covers solder metallurgy, paste, stencils and printing, component handling and placement, reflow profiling, wave, selective and hand soldering, fluxes, cleaning, coating, ESD control and the workmanship standards that define a good joint.

Intermediate · 5 modules · 18 lessons · free certificate

About this course

A solder joint is a small piece of metallurgy made in a few seconds, and whether it lasts depends on decisions taken all along the line: the alloy, the paste and its storage, the stencil, how the board was printed and placed, how the parts were kept dry and how the oven or wave was set up. This course follows that line in order, explaining the physics and chemistry behind each step so you can read a paste datasheet, question a reflow profile, specify cleaning or coating and talk to an assembler on equal terms.

Numbers come from named standards, from physical properties of the alloys or are labelled as typical. Process windows depend on the specific paste, flux, components and equipment, so the course always points you to the document that governs them: the paste and flux datasheets, the component's moisture and temperature ratings, and the workmanship standard named on your drawing.

Inspection methods, defect diagnosis and rework are covered in depth in Inspection, Defects and Rework, and layout rules for assembly in Design for Assembly and Test; this course touches them only where the process needs them. Completing the course earns an AAVICO Academy certificate of completion. It is not IPC training or certification to any standard.

Before you start: You should know how a PCB is constructed and what surface-mount and through-hole parts are. PCB Basics for Beginners covers the background, and PCB Design for Manufacturing is useful but not required.

What you will learn

  • Explain the difference between tin-lead and lead-free solders, and how wetting and intermetallics form a joint
  • Choose solder paste and stencil parameters and check apertures against IPC-7525 area ratio guidance
  • Handle moisture-sensitive and ESD-sensitive components correctly and understand how placement machines work
  • Read and question a reflow profile against the paste datasheet and J-STD-020 component limits
  • Select between wave, selective, pin-in-paste and hand soldering for through-hole parts, and solder well by hand
  • Specify flux, cleaning, conformal coating and the workmanship class on an assembly drawing

Who it is for

  • Hardware engineers who release boards to an assembler and want to understand what happens to them
  • Manufacturing, process and quality engineers new to electronics assembly
  • Technicians who hand solder, rework or set up small-batch assembly in-house
  • Engineering leads and buyers who review assembler quotes, process data and quality reports

Syllabus

Module 1: Solder Metallurgy, Wetting and Flux

What solder alloys are, how they melt, how a joint bonds through wetting and intermetallics, and what flux does.

  1. Tin-Lead and Lead-Free Solder Alloys
  2. Wetting, Intermetallics and Surface Finishes
  3. Flux, Residues and Cleaning
  4. Module quiz (5 questions)

Module 2: Solder Paste, Stencils and Printing

Choose and handle solder paste, design stencils that release cleanly, run the printer well and measure the result with SPI.

  1. Solder Paste: Composition, Powder and Storage
  2. Stencil Design: Thickness, Apertures and Steps
  3. The Printing Process
  4. Solder Paste Inspection
  5. Module quiz (5 questions)

Module 3: Components, Handling and Placement

How parts arrive at the line, how moisture and static are controlled, and how placement machines pick, see and place them.

  1. Component Packaging for Automated Assembly
  2. Moisture-Sensitive Devices and J-STD-033
  3. ESD Control in Assembly
  4. Pick and Place: Feeders, Nozzles, Vision and Accuracy
  5. Module quiz (5 questions)

Module 4: Reflow Soldering

Understand the reflow profile zone by zone, measure and tune it on real boards, and choose the oven atmosphere and heating method.

  1. The Reflow Profile
  2. Profiling a Board and Tuning the Oven
  3. Nitrogen, Convection and Vapour Phase
  4. Module quiz (5 questions)

Module 5: Through-Hole Soldering, Coating and Workmanship

Solder through-hole parts by wave, selective, pin-in-paste and hand methods, protect boards with conformal coating and specify workmanship.

  1. Wave Soldering
  2. Selective Soldering and Pin-in-Paste
  3. Hand Soldering Technique
  4. Conformal Coating and Workmanship Standards
  5. Module quiz (5 questions)

Free downloads for this course

Enrol for free

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.