Thermal Management for PCBs
Estimate, design and verify the temperatures on your board before they become field failures.
Learn to predict and control component temperatures on a printed circuit board. The course covers heat transfer and thermal resistance networks, package thermal metrics and their limits, copper spreading, thermal vias, metal-core boards, heatsinks, interface materials, enclosures and airflow, then simulation, measurement and a worked design workflow.
Intermediate · 5 modules · 16 lessons · free certificate
About this course
Most thermal problems on a board are decided in the first week of layout: which package a regulator comes in, how much copper sits under it, how many vias connect it to a plane and where the hot parts sit relative to the capacitors and sensors that dislike heat. This course gives you the physics and the hand calculations to make those decisions with numbers rather than guesses, and to know when a hand calculation is no longer enough.
You will build thermal resistance networks, estimate junction temperatures from datasheet metrics such as theta-JA and psi-JT while understanding why the JEDEC test board is not your board, size thermal via arrays and copper areas, choose heatsinks and interface materials, estimate enclosure and airflow limits, and plan simulation and measurement so prototypes confirm the design. Material values are labelled as typical: confirm them with your suppliers and your fabricator.
The course concentrates on board-level conduction and the paths heat takes out of the product. It does not teach the use of a particular simulation package, the detailed design of fans or liquid cooling, or the safety testing of products, which belongs with the regulatory work covered in Regulatory Compliance for Electronic Products.
Before you start: You should be comfortable with basic circuit analysis and know how a multilayer PCB is built. PCB Basics for Beginners covers the board background, and PCB Layout Fundamentals: Placement and Routing is a useful companion. The maths needed is algebra and a calculator.
What you will learn
- Explain how temperature limits reliability and set a junction temperature target with derating margin
- Model heat flow with thermal resistance networks using conduction, convection and radiation
- Estimate junction temperature from theta and psi metrics and judge the limits of JEDEC test data
- Design copper spreading, thermal via arrays and, where needed, heavy copper or metal-core boards
- Select heatsinks, interface materials and airflow, and estimate enclosure temperature rise
- Plan thermal simulation and measurement with thermocouples and infrared cameras, and correlate the results
Who it is for
- Hardware engineers designing boards with regulators, power stages, processors or LEDs that run warm
- PCB layout designers who want to place copper and vias for heat with a reason behind each choice
- Engineers who review datasheet thermal figures and need to know how far to trust them
- Test and validation engineers planning temperature measurements on prototypes
Syllabus
Module 1: Why Temperature Matters and How Heat Moves
Understand component temperature limits and derating, the three modes of heat transfer and thermal resistance networks.
- Why Temperature Matters
- Conduction, Convection and Radiation
- Thermal Resistance Networks
- Module quiz (5 questions)
Module 2: Package Thermal Metrics and Junction Temperature
Read theta and psi metrics correctly, estimate power loss and junction temperature, and know where the datasheet numbers stop applying.
- Reading Package Thermal Metrics
- Estimating Power and Junction Temperature
- Where Datasheet Numbers Stop Applying
- Module quiz (5 questions)
Module 3: Spreading Heat Through the Board
Use copper planes and pours, placement, thermal vias, heavy copper and metal-core substrates to move heat away from hot parts.
- Copper as a Heat Spreader
- Placement, Pours and Planes
- Thermal Vias Under Exposed Pads
- Heavy Copper and Metal-Core Boards
- Module quiz (5 questions)
Module 4: Heatsinks, Interface Materials and Enclosures
Size a heatsink from a thermal budget, choose interface materials, and estimate how the enclosure and airflow limit the whole product.
- Sizing and Fitting Heatsinks
- Thermal Interface Materials
- Enclosures and Airflow
- Module quiz (5 questions)
Module 5: Simulation, Measurement and a Design Workflow
Use thermal simulation sensibly, measure temperatures correctly with thermocouples and infrared cameras, and follow a workflow from estimate to verified design.
- Thermal Simulation
- Measuring Board Temperatures
- A Practical Workflow with Worked Estimates
- Module quiz (5 questions)
Free downloads for this course
- PCB Layout Review Checklist (Checklist)
- Trace Width and Current Reference (Reference)
Discuss your project
Email support@aavico.com or use Get in Touch when the website finishes loading.