Trace Width and Current Reference

IPC-2221 and IPC-2152 compared, a computed width table, copper resistance, voltage drop and via current

Trace width for current is a thermal question (how hot does the copper get) and an electrical one (how much voltage is lost). This reference covers both. It explains where the familiar IPC-2221 numbers come from and why IPC-2152 is now the better source, gives a width table calculated from the IPC-2221 formula with every assumption stated, and gives sheet resistance values so you can calculate voltage drop for any trace.

Use the table for a first estimate and a sanity check. For high-current paths, check the result against IPC-2152 or a thermal simulation, calculate the voltage drop on the whole path including the return, and confirm minimum widths for your copper weight with your fabricator.

What is inside

  • IPC-2221 versus IPC-2152: what each is and when to use it
  • The IPC-2221 formula with units, constants and stated limits
  • A width table for 1 oz and 2 oz copper at 10 °C rise, computed from that formula
  • Copper resistivity, sheet resistance per square and temperature coefficient
  • Voltage drop and power loss formulas with a worked example
  • Via barrel cross-section, resistance and typical current guidance

Contents

  1. IPC-2221 and IPC-2152
  2. The IPC-2221 formula
  3. Width table from the IPC-2221 formula, 10 °C rise
  4. Copper resistance
  5. Voltage drop and power loss
  6. Via current guidance
  7. Notes and limits

Formats: PDF document. Sign in to download for free.

Related courses

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.