PCB Design for Manufacturing

Design boards that fabricators and assemblers can build first time, at standard cost.

Turn a working layout into a board that builds cleanly. This course covers stackups and controlled impedance, trace sizing and clearance, fabrication and assembly rules, panelisation, the complete manufacturing data package and test access, with the numbers fabricators and assemblers actually work to.

Intermediate · 5 modules · 17 lessons · free certificate

About this course

A board can pass every design rule check in the layout tool and still come back with engineering queries, a higher price, a longer lead time or a batch of marginal assemblies. Most of those problems are decided long before the files are sent: in the stackup, in the footprints, in the clearances and in what the data package does or does not say. This course works through those decisions in the order a design meets them.

Each module explains the manufacturing process behind a rule, so you understand why the limit exists and can judge when it is safe to approach it. Numbers come from IPC standards, from physics and from typical fabricator capability. Capability figures are labelled as typical because they vary between suppliers: always confirm them against the published rules of the fabricator and assembler you intend to use.

The course assumes you already know what a PCB is and have laid one out. If you have not, start with the beginner PCB course in the AAVICO Academy and return here afterwards.

Before you start: You should know how a PCB is constructed and have completed at least one layout in a PCB design tool. The beginner PCB course in the AAVICO Academy covers the background assumed here.

What you will learn

  • Plan a symmetric, buildable stackup and specify controlled impedance so the fabricator can meet it
  • Size traces, vias and copper for current and voltage drop, and set conductor spacing for voltage
  • Apply fabrication rules for trace and space, holes, annular rings, solder mask, silkscreen and board edges
  • Design footprints and placement that assemble reliably, with clear polarity, fiducials and paste apertures
  • Panelise a board and prepare a complete, consistent fabrication and assembly data package
  • Plan test access for flying probe or fixture-based testing while the layout can still change

Who it is for

  • Electronics engineers who lay out their own boards and want fewer fabrication queries and respins
  • Hardware designers moving a product from prototype builds to volume production
  • Layout specialists who want the reasoning behind fabricator and assembler design rules
  • Engineering leads and buyers who review manufacturing data packages before release

Syllabus

Module 1: Stackups and Controlled Impedance

Plan a stackup the fabricator can build, design traces to an impedance target and specify it so it is met.

  1. Planning a Stackup the Fabricator Can Build
  2. Designing Traces to an Impedance Target
  3. Return Paths and Specifying Impedance
  4. Module quiz (5 questions)

Module 2: Current, Voltage Drop and Clearance

Size copper for temperature rise and voltage drop, carry current through vias, and space conductors for the voltages between them.

  1. Sizing Traces for Current
  2. Voltage Drop, Planes and Vias
  3. Conductor Spacing for Voltage
  4. Module quiz (5 questions)

Module 3: Fabrication Design Rules

Work within the etching, drilling, plating, mask and routing limits that decide whether a bare board is built at standard cost.

  1. Trace, Space and Copper Features
  2. Holes, Aspect Ratio and Annular Rings
  3. Solder Mask, Silkscreen and Board Edges
  4. Module quiz (5 questions)

Module 4: Footprints, Packages and Assembly

Design land patterns, thermal connections, paste apertures and placement that assemble reliably and are easy to inspect.

  1. Land Patterns and Pad Design
  2. Thermal Relief and Solder Paste
  3. Fiducials, Spacing and Placement
  4. Polarity, Orientation and Markings
  5. Module quiz (5 questions)

Module 5: Panels, Data Package and Test Access

Panelise for assembly, release a complete and consistent data package, and design in the access that testing needs.

  1. Panelisation: Tabs, V-Score and Rails
  2. The Fabrication Data Package
  3. The Assembly Data Package
  4. Designing for Test Access
  5. Module quiz (5 questions)

Free downloads for this course

Enrol for free

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.