IPC Product Classes 1, 2 and 3 Explained

What the classes mean, how to choose and specify one, and the mistakes that cost money

Nearly every PCB and assembly quote asks the same question: which IPC class? The answer changes what the fabricator must build and test, what the assembler must inspect, and what you pay. Yet the class is often chosen by habit, copied from an old drawing, or written so vaguely that supplier and customer read it differently.

This guide explains the three classes used across IPC-6012, IPC-6013, IPC-A-600, J-STD-001, IPC-A-610 and IPC/WHMA-A-620, how to decide which one your product needs, and how to state it unambiguously. Differences between classes are described qualitatively; for the exact criteria buy the current revision of the relevant standard.

What is inside

  • Plain-language definitions of Class 1, Class 2 and Class 3
  • A decision guide for choosing the class of a product
  • Example drawing notes and purchase order wording
  • How the classes differ for bare boards, assemblies and harnesses
  • What drives cost when moving from Class 2 to Class 3
  • Common mistakes, including mixing classes between bare board and assembly
  • A specification checklist to use before release

Contents

  1. What the classes are
  2. Who chooses the class, and how
  3. Specifying the class on drawings and purchase orders
  4. How the classes differ in practice
  5. Cost and lead-time implications
  6. Common mistakes
  7. Specification checklist
  8. Notes and limits

Formats: PDF document. Sign in to download for free.

Related courses

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.