PCB Stackup Reference
Typical 2 to 10 layer stackups for 1.6 mm boards, symmetry rules, copper weights and a specification checklist
This reference collects the stackups that engineers most often start from when a board is about 1.6 mm thick, and explains why each layer is assigned the way it is. Every stackup here is a typical starting point, not a qualified build: the dielectric thicknesses are illustrative, and the real values come from your fabricator's standard stackups and material stock.
Use it at the start of layout to choose a layer count and arrangement, and again before release to check that the stackup on your fabrication drawing is complete and symmetric. Send the fabricator your intent (layer order, plane assignments, impedance targets, overall thickness) and ask for their proposed build with real material names and pressed thicknesses before you finalise trace widths.
What is inside
- Design principles that every stackup choice is checked against
- Typical 2, 4, 6, 8 and 10 layer arrangements with reasoning
- Illustrative dielectric thicknesses for a 1.6 mm finished board
- Symmetry and balance rules that keep bow and twist under control
- Copper weight choices with nominal thicknesses and trade-offs
- A stackup specification checklist for the fabrication drawing
Contents
- How to read this reference
- Two and four layer stackups
- Six layer stackups
- Eight and ten layer stackups
- Symmetry and balance rules
- Copper weight choices
- Stackup specification checklist
- Notes and limits
Formats: PDF document. Sign in to download for free.
Related courses
Discuss your project
Email support@aavico.com or use Get in Touch when the website finishes loading.