PCB Laminates and Materials Selection

Understand what a laminate is made of, read its datasheet critically and choose the right one for the job.

Learn what is inside a PCB laminate and how to choose one. This course covers resin, glass and copper foil, thermal properties for lead-free assembly, Dk, Df and roughness for signal loss, CAF and pad cratering, the main material families, halogen-free grades, IPC-4101 call-outs and a practical selection process.

Intermediate · 5 modules · 17 lessons · free certificate

About this course

Most boards are built on FR-4 without anyone thinking hard about it, and for many designs that is the right answer. But FR-4 is a family, not a material, and the differences between its members decide whether a thick board survives several lead-free reflows, whether a 25 Gb/s link has enough margin and whether a board fails in the field years later from a filament growing between two vias. This course explains what a laminate is made of, what each datasheet property really measures and how those properties connect to the failures and limits you care about.

You will learn to read thermal properties such as Tg, Td, z-axis expansion and time to delamination; electrical properties such as Dk and Df, including why two datasheets that quote the same property may not be comparable; and the effect of glass style and copper roughness on skew and loss. The final module tours the main material families with typical property ranges, explains halogen-free grades and IPC-4101 specification sheets, and gives a selection process you can use on your next design. All property ranges are typical values for generic classes; always design with your fabricator's and material supplier's current data.

Out of scope: detailed stackup planning, which is covered in PCB Stackup Design; impedance calculation, covered in Controlled Impedance and Transmission Lines; flexible materials, covered in Flex and Rigid-Flex PCB Design; and the fabrication processes themselves, covered in PCB Fabrication Processes in Depth.

Before you start: You should know how a multilayer PCB is constructed from cores and prepreg and have laid out at least one board. PCB Basics for Beginners covers the background, and PCB Design for Manufacturing is useful but not required.

What you will learn

  • Explain how resin, glass reinforcement and copper foil combine to set a laminate's properties
  • Interpret Tg, Td, z-axis CTE and time to delamination and judge what a lead-free assembly needs
  • Interpret Dk and Df data, estimate dielectric and conductor loss trends and account for glass weave and foil roughness
  • Recognise CAF, moisture and pad cratering risks and the material and layout choices that reduce them
  • Compare the main laminate families and call out a material using an IPC-4101 specification sheet
  • Run a practical material selection that balances performance, cost, availability and fabricator equivalents

Who it is for

  • Hardware and layout engineers who need to choose or approve a laminate rather than accept a default
  • Signal integrity and RF designers who want to understand where loss and skew come from in the material
  • Engineers moving products to lead-free assembly, harsher environments or higher reliability classes
  • Engineering leads, quality engineers and buyers who review fabrication drawings and material substitutions

Syllabus

Module 1: Inside a Laminate

The resin, glass and copper that make up a laminate, how glass styles and resin content shape its properties, and why the weave matters to fast signals.

  1. What a Laminate Is Made Of
  2. Glass Fabric Styles and Resin Content
  3. The Fibre Weave Effect and Skew
  4. Module quiz (5 questions)

Module 2: Thermal Properties and Lead-Free Assembly

What Tg, Td, z-axis expansion and time to delamination really measure, and why lead-free soldering raised the bar for laminates.

  1. Glass Transition Temperature (Tg)
  2. Decomposition Temperature and Z-Axis Expansion
  3. Time to Delamination and Lead-Free Assembly
  4. Module quiz (5 questions)

Module 3: Electrical Properties and Copper Foil

Dk and Df and how they set delay and loss, how they vary with frequency, temperature and moisture, why datasheets disagree, and how copper roughness adds loss.

  1. Dk, Df and Signal Loss
  2. How Dk and Df Vary with Frequency, Temperature and Moisture
  3. Reading Electrical Datasheets: Test Methods and Design Dk
  4. Copper Foil Types and Roughness
  5. Module quiz (5 questions)

Module 4: Reliability: CAF, Moisture and Pad Cratering

Three material-related failure mechanisms that do not show up on a new board, and the material, layout and process choices that prevent them.

  1. Conductive Anodic Filament (CAF)
  2. Moisture Absorption, Storage and Baking
  3. Pad Cratering and Laminate Brittleness
  4. Module quiz (5 questions)

Module 5: Material Families and Selection

The main laminate families and where each fits, halogen-free grades, calling out materials with IPC-4101 and a practical selection process that includes cost, availability and equivalents.

  1. Material Families at a Glance
  2. Halogen-Free Laminates
  3. Calling Out Materials with IPC-4101
  4. A Practical Material Selection Process
  5. Module quiz (5 questions)

Free downloads for this course

Enrol for free

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.