PCB Laminate Materials Guide

Tg, Td, CTE, Dk, Df, T260/T288 and CAF explained, generic material classes, IPC-4101 call-outs and a selection checklist

Laminate data sheets are full of properties that look alike and are measured in different ways. This guide explains each property in practical terms, shows the typical range for each generic class of material, and explains how to specify material on a drawing so that any qualified fabricator can build your board without a brand being locked in unless you need one.

All ranges here are typical and generic. Real values depend on the specific product, resin content, glass style, test method and frequency, so use the manufacturer's data sheet for design calculations and confirm availability and stackup options with your fabricator.

What is inside

  • Plain explanations of Tg, Td, CTE, Dk, Df, T260/T288 and CAF resistance
  • Why Tg alone does not make a material suitable for lead-free assembly
  • Typical property ranges for generic material classes
  • A dielectric loss approximation with a worked comparison
  • IPC-4101 slash sheet call-outs at a concept level
  • Glass weave, resin content and copper roughness effects
  • A material selection checklist

Contents

  1. Properties explained
  2. Generic material classes
  3. Dielectric loss at a glance
  4. IPC-4101 slash sheets
  5. Selection checklist
  6. Notes and limits

Formats: PDF document. Sign in to download for free.

Related courses

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.