Controlled Impedance Quick Reference
Structures, sensitivities, approximate formulas, interface targets, tolerances, drawing tables and TDR coupons
Controlled impedance is a collaboration between designer and fabricator. The designer sets targets and a first-pass geometry; the fabricator adjusts width and dielectric thickness to their real materials and proves the result on test coupons. This reference gives you what you need for your side of that work on one or two printed pages.
The formulas here are approximations, useful for a first estimate, for understanding sensitivities and for spotting a wrong number from a tool. Final widths should come from a field solver run on the fabricator's proposed stackup. Interface targets are stated as commonly used values; the interface specification and the chip vendor's layout guide are the authority.
What is inside
- Definitions of microstrip, stripline, coplanar and differential structures
- A table of what moves impedance up or down, with example sensitivities
- Closed-form approximations with validity limits and worked values
- Commonly used impedance targets for popular interfaces
- Typical tolerances and what drives impedance variation
- What to put in the impedance table on the fabrication drawing
- TDR coupon and test report notes
Contents
- Structures
- What moves impedance
- Approximate formulas
- Common interface targets
- Tolerances and variation
- Impedance table on the drawing
- TDR coupon notes
- Notes and limits
Formats: PDF document. Sign in to download for free.
Related courses
Discuss your project
Email support@aavico.com or use Get in Touch when the website finishes loading.