Schematic Design Review Checklist

Concrete checks for power, pins, protection, connectors and BOM data before layout starts

A schematic error found before layout costs minutes; the same error found at bring-up costs a respin. This checklist turns a schematic review into a repeatable process: each item is a statement the reviewer can confirm against the schematic, the datasheets and the BOM.

Use it for a self-review before you ask for a peer review, then again in the formal review meeting. Record findings and their resolution in the sign-off table at the end so the review leaves a trail.

What is inside

  • Power tree, regulator and power budget checks
  • Decoupling and bulk capacitance checks, including MLCC DC bias derating
  • A pin-by-pin accounting check for unused, no-connect and exposed pads
  • Pull-up, pull-down and boot strap checks with the I2C pull-up sizing formulae
  • Protection and connector checks
  • Net naming, BOM attribute and documentation checks
  • A review sign-off table and findings log

Contents

  1. Before the review
  2. Power
  3. Decoupling
  4. Every pin accounted for
  5. Pull-ups, pull-downs and straps
  6. Protection
  7. Connectors
  8. Net naming, BOM and documentation
  9. Review sign-off
  10. Notes and limits

Formats: PDF document. Sign in to download for free.

Related courses

Discuss your project

Email support@aavico.com or use Get in Touch when the website finishes loading.