Component packaging guidelines

When you supply some or all of the parts for an assembly, how they arrive decides how quickly they can be loaded onto the line. Follow these rules for packing, labelling and spares and your kit can go from receiving to placement without being repacked.

Shortest continuous cut-tape strip (12 in)
300 mm
Extra quantity for through-hole parts
1%
Per reference line, labelled
1 bag
Moisture-sensitive parts stay in barrier bags
Sealed

Packing rules

Please do

  • Label every ESD bag or packet with the reference designators, the manufacturer part number and the quantity.
  • Keep BGA, QFN and QFP parts in their original trays, tubes or reels.
  • Keep moisture-sensitive devices in their sealed barrier bags with the humidity indicator card. If the original bag has been opened, reseal the parts in a moisture barrier bag with desiccant.
  • Send parts on reels where you can, sized to the order. Anything left over comes back with the assembled boards.
  • Email us about do-not-populate parts and alternate part numbers before the parts ship, so the kit and the BOM agree.

Please avoid

  • Short pieces of cut tape. Each strip must be continuous and at least 300 mm (12 in) long so it can be loaded into a feeder.
  • Loose SMD parts in bags. They cannot be machine placed and are easily mixed up.
  • Used, desoldered or oxidised parts, which solder poorly and can fail in service.
  • Several different parts in one bag. Pack each reference line separately.
Two lengths of carrier tape side by side. The acceptable one is a single continuous strip with leader tape and sprocket holes intact. The unacceptable one is made of short cut pieces, a strip shorter than the minimum and a strip with torn sprocket holes.
Cut tape has to reach the feeder sprockets and run continuously. Short or damaged strips have to be hand placed.

Accepted package formats

How customer-supplied parts can arrive
FormatAcceptedNotes
Full or partial reelsYesPreferred for SMD parts, and the fastest to load.
Cut tapeYesOne continuous strip per part number, at least 300 mm (12 in) long.
Tubes and traysYesKeep fine-pitch and area-array packages in their original trays or tubes.
Loose partsThrough-hole onlyLoose SMD parts are hand placed at extra cost, if they can be used at all.

Extra quantities

A feeder needs leader tape before the first part can be picked, and small passives are occasionally dropped or rejected by the vision system. Send the extra quantities below with small SMD passives to avoid a stop on the line. For through-hole parts, add 1%. Integrated circuits, modules, BGAs, relays and sockets do not need extras beyond the build quantity.

Extra quantity to send with small SMD passives
Package1 to 50 parts51 to 100101 to 1,0001,001 to 2,0002,001 or more
120615 pcs10%8%5%3%
080515 pcs15%10%7%5%
060315 pcs20%15%10%7%
040225 pcs25%15%10%7%
020125 pcs30%20%15%10%
0100550 pcs40%25%20%15%

Quantity bands are the parts needed for the whole order. In the first band add the fixed number of pieces; in the others add the percentage.

Labelling bags and boxes

If parts are not in the manufacturer’s original labelled packaging, put a label on each bag with these fields:

Bag label (example)
FieldExample
AAVICO order numberYour order reference
Manufacturer part numberRC0603FR-0710KL
Quantity required200
Quantity sent230
Reference designatorsR4, R7, R9, R12
Description10 kΩ 1% 0.1 W resistor, 0603

Mark each outer box with the order number, the box number and the total number of boxes (for example, box 2 of 4), and ship it to the address on your order confirmation. Pack parts so they cannot move in transit, with protective covers on reels and trays.

Ready when your files are

Send your design for a quote

Upload your Gerber, drill and assembly files with the quantities you need. Our engineers check them against these guidelines and come back with a price, a schedule and any questions.